It is currently Wed Jun 28, 2017 9:47 am


All times are UTC + 1 hour




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: LPBP & ANVIS
PostPosted: Wed May 27, 2015 4:15 pm 
The New Guy
User avatar

Joined: Thu May 22, 2014 4:56 pm
Posts: 6
Location: Baden NÖ, Austria
Hello to everyone here.. :)
Huh, this could be the strangest request but I don't have any choice.

As you all know, a lot of guys like to have ANVIS&LPBP stuff on their helmets.

Well, for me and my friend it's a li'l bit unattainable. We live in Europe, precisely in Bosnia and Herzegovina, and it's kinda hard to get all that equipment (ITAR, big shipping prices, etc), and above all of that, we're students without a lot of money. Therefore we turned ourselves to DIY. :)

Now I will write my (strange) request and I'm asking for your help.
I decided to create a 3D model of LPBP (and ANVIS probably) in 3ds max, and I found a friend who could provide us free 3d printing service (I'm not even trying to make an working lpbp replica, it's just for 'fashion').
All I need now is a bunch of photos, drawings, sketches and real measurements of LPBP and ANVIS.

Is there anyone here who could take those photos, make bottom and side drawings (just for overview and proper modeling), measure that stuff (inches, centimeters, doesn't matter at all) and give me all the data I need??

Thanks in advance,

Mario

(Sorry if I made gramatical mistakes, English is my second language and it's hard to explain everything)

_________________
Rangers lead the way, Sir!


Last edited by Marinho_Sar on Wed Aug 19, 2015 8:42 pm, edited 1 time in total.

Top
Offline Profile  
 
 Post subject: Re: LPBP & ANVIS
PostPosted: Thu May 28, 2015 3:39 am 
Earning his keep

Joined: Fri Sep 16, 2011 5:26 am
Posts: 274
Location: Idaho and Green Bay, WI
Might want to ask specifically for non American help on that one as it is probably over the line of ITAR.


Top
Offline Profile  
 
 Post subject: Re: LPBP & ANVIS
PostPosted: Wed Aug 19, 2015 8:43 pm 
The New Guy
User avatar

Joined: Thu May 22, 2014 4:56 pm
Posts: 6
Location: Baden NÖ, Austria
bump? :(

_________________
Rangers lead the way, Sir!


Top
Offline Profile  
 
 Post subject: Re: LPBP & ANVIS
PostPosted: Wed Sep 16, 2015 1:45 am 
I can't work for assholes
User avatar

Joined: Thu Sep 03, 2009 3:09 am
Posts: 1621
Location: Dead Center of Texas
best bet would probably be to buy a resin copy and then just go off that.
you are gonna be hard pressed to find someone who will take 100 pictures with a scale for you

http://www.ebay.com/itm/Replica-dummy-A ... 419a6c45b9

there are helmet mounts and LPBP's too on ebay. "anvis resin" "anvis dummy" "anvis copy"


Top
Offline Profile  
 
 Post subject: Re: LPBP & ANVIS
PostPosted: Thu Jan 14, 2016 3:05 pm 
Not completely useless

Joined: Thu Sep 16, 2010 2:41 pm
Posts: 78
marinho,

as an advice from a guy who´s also in the same position with another project
dont count on others.
they all want but few give.


Top
Offline Profile  
 
 Post subject: Re: LPBP & ANVIS
PostPosted: Thu Jan 14, 2016 6:10 pm 
Quite OK actually
User avatar

Joined: Fri Aug 31, 2012 2:26 pm
Posts: 119
Location: Kazakhstan
tell me how you want me to take photo, and I'll do my best

_________________
Three rules of whatever wannabe: 1. Look cool; 2. Don't get lost; 3. If lost look cool


Top
Offline Profile  
 
 Post subject: Re: LPBP & ANVIS
PostPosted: Sat Jan 16, 2016 4:20 pm 
The New Guy
User avatar

Joined: Thu May 22, 2014 4:56 pm
Posts: 6
Location: Baden NÖ, Austria
Rumkugel wrote:
marinho,

as an advice from a guy who´s also in the same position with another project
dont count on others.
they all want but few give.

all I could say is that I'm dissapointed a li'l bit.. but that's okay, we're not all the same. :)
TeaBoss wrote:
tell me how you want me to take photo, and I'll do my best

thanks for your reply.. to be honest I need a lot of photos, highly detailed from any possible corner, with so much details and if it's possible taking those photos using tape measure/ruler..
that's because I would use CAD or 3DS max to make a highly detailed 3D model with separated parts, to make it even more realistic than one-piece resin models.. I'm pretty sure it would be hard job, but I'm willing to do it.
here is a (li'l bit funny) photo, I tried to show what I really need, and on the bottom of this photo, you will see what I intend to do (not my projects, just google source), but I need proper measurements and details.. thanks in advance,
Marinho

Image

_________________
Rangers lead the way, Sir!


Top
Offline Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme created StylerBB.net & kodeki